|
|
Post by PlasticDreams on Oct 24, 2012 19:48:25 GMT -5
Our next project:  |
|
|
|
Post by PlasticDreams on Oct 26, 2012 15:17:35 GMT -5
|
|
|
|
Post by PlasticDreams on Oct 28, 2012 11:57:35 GMT -5
We removed the fenders from the cab and glued the hood into place. The hood gaps will be filled.   Tilt feature |
|
|
|
Post by PlasticDreams on Nov 5, 2012 17:54:56 GMT -5
|
|
|
|
Post by PlasticDreams on Nov 5, 2012 18:00:12 GMT -5
|
|
|
|
Post by PlasticDreams on Nov 11, 2012 11:52:07 GMT -5
The radiator support puts the unit at an angle so we will use an electric fan. The Dodge 440 mates up to the engine brace nicely.  |
|
|
|
Post by PlasticDreams on Dec 1, 2012 21:47:55 GMT -5
Here are some updates, we did reposition the tube frame to make room for the hinges.   |
|
|
|
Post by PlasticDreams on Dec 2, 2012 12:52:51 GMT -5
|
|
|
|
Post by PlasticDreams on Dec 2, 2012 13:34:17 GMT -5
|
|
|
|
Post by PlasticDreams on Dec 4, 2012 15:47:16 GMT -5
We continue to work on the frame for the radiator housing.  |
|
|
|
Post by PlasticDreams on Dec 4, 2012 16:12:18 GMT -5
Here is the engine setup with a 440.  |
|
|
|
Post by PlasticDreams on Dec 5, 2012 13:32:55 GMT -5
|
|
|
|
Post by PlasticDreams on Dec 12, 2012 13:32:33 GMT -5
The spark plugs holes have made. The brace has filled in with putty and primered.  
|
|
|
|
Post by PlasticDreams on Dec 12, 2012 20:31:03 GMT -5
|
|
|
|
Post by PlasticDreams on Dec 15, 2012 18:02:13 GMT -5
|
|
